Airlife air cleaners
î÷èñòèòåëü âîçäóõàrussian version
âîçäóõîî÷èñòèòåëèmain pageInternet shopmap of siteFAQsearchcontacts
 
indoor airhow to clean airair purifyingFAQarticlesphotocatalysisHow to contacts with us
Rambler's Top100

Canal Solutions for Air Purification in existing ventilation and conditioning systems

airlfie telephon number

Photocatalytic filter consists of a metal case ‘1' made of zinc-coated steel with flanges, and separated by an internal partition ‘2'. The cartridge ‘3' is placed on the partition. The catalyst ‘4' is on the surface of the cartridge. The catalyst is illuminated by a UV lamp ‘5', which is placed inside of the aerial filter. Air coming into the inlet flange ‘6' passes through the aerial element, where on the surface of the illuminated catalyst the oxidation reactions of noxious compounds take place.

Air purified of those compounds then goes through the outlet flange ‘7' into the ventilation or conditioning system. To ensure the most efficient air filtration it is recommended to place the photocatalytic filter in the recirculation circuit.

Standard diameter measures of the conjunctive flanges are as follows: 100 to 200 mm. These may vary depending on a particular wish of a client.

Filters productivity and purification efficiency enhancement (up to 20%) may easily be achieved by using special double (triple) width filter constructions containing two (three) parallel aerial elements with ultraviolet lamps. Another way of increasing the level of purification efficiency (up to 30%) is a successive operation of the filter constructions.

Power supply of the photocatalytic filters is AC 220V. Each filter is equipped with an electric block with PS and control systems included.

Control systems provide:

- Indication of electric power connection

- Indication of standard operation of UV illuminators

Long-term operation of the PCO may be ensured only on condition the air coming into them is as much as possible purified of dust (i.e. F3, F5 type filters). This will provide the duty cycle of the cartridge equal to two years and more. In case of a more contaminated air the duty cycle may be reduced.

Maximum air resistance of the PCO does not go over 50 Pa. Air temperature in the inlet location of the photocatalytic filters is to be confined within the following range: -10 o …500 o C.

Filters replacement is to be accomplished once every two years. AIRLIFE photocatalytic filters are equipped with PHILIPS ultraviolet lamps, which duty cycle equals 5-7 years.

1 stage
Óñòðîéñòâî îäíîñòóïåí÷àòîãî ôîòîêàòàëèòè÷åñêîãî ôèëüòðà

2-stage
Óñòðîéñòâî äâóõñòóïåí÷àòîãî ôîòîêàòàëèòè÷åñêîãî ôèëüòðà

 

 

 

  For more information  

Sevezh-60

Comparison table of the main characteristics of the air purifiers

List of substances completely eliminated by the method of Photocatalysis

AIRLIFE photocatalytic air purifiers

Sevezh - 300

What is the photocatalytic air purification?

Sevezh - 35

 

     

 

 

 

ITI, Moscow, 117433, 4 Bardina st.,
Phone: +7 495 923-7209, E-mail: airlife@airlife.ru
Rambler's Top100